Kron Occurrence - Cisco CSACS-1121-K9 Reference Manual

Configuration Commands
After you enter the list-name in the kron policy-list command, you enter the config-Policy List
Note
configuration submode (see the following Syntax Description).
cli
do
end
exit
no
Defaults
No default behavior or values.
Command Modes
Configuration
Usage Guidelines Use the kron policy-list command in conjunction with the cli command to create a Command Scheduler
policy containing EXEC CLI commands to be scheduled to run on the ACS server at a specified time.
Use the kron occurrence and policy list commands to schedule one or more policy lists to run at the
same time or interval. See
CLI Reference Guide for the Cisco Secure Access Control System 5.1
A-130
Command to be executed by the scheduler. Up to 80 alphanumeric characters.
EXEC command. Allows you to perform any EXEC commands in this mode
(see do, page A-118).
Exits from the config-Policy List configuration submode and returns you to
the EXEC mode.
Exits this submode.
Negates the command in this mode. One keyword available:
cli–Command to be executed by the scheduler.
•
kron occurrence, page A-129.
Appendix A ACS Command Reference
OL-18996-01