Debug - Cisco CSACS-1121-K9 Reference Manual

EXEC Commands

debug

To display errors or events for command situations, use the debug command in the EXEC mode.
Syntax Description all
application
backup-restore
cdp
CLI Reference Guide for the Cisco Secure Access Control System 5.1
A-36
debug {all | application | backup-restore | cdp | | config | icmp | copy | locks | logging | snmp |
system | transfer | user | utils}
Enables all debugging.
Application files.
all—Enables all application debug output. Set level between 0 and 7 with
•
0 being severe and 7 being all.
install—Enables application install debug output. Set level between 0
•
and 7 with 0 being severe and 7 being all.
operation—Enables application operation debug output. Set level
•
between 0 and 7 with 0 being severe and 7 being all.
uninstall—Enables application uninstall debug output. Set level between
•
0 and 7 with 0 being severe and 7 being all.
Backs up and restores files.
all—Enables all debug output for backup-restore. Set level between 0
•
and 7 with 0 being severe and 7 being all.
backup—Enables backup debug output for backup-restore. Set level
•
between 0 and 7 with 0 being severe and 7 being all.
backup-logs—Enables backup-logs debug output for backup-restore. Set
•
level between 0 and 7 with 0 being severe and 7 being all.
• history—Enables history debug output for backup-restore. Set level
between 0 and 7 with 0 being severe and 7 being all.
• restore—Enables restore debug output for backup-restore. Set level
between 0 and 7 with 0 being severe and 7 being all.
CDP configuration files.
• all—Enables all CDP configuration debug output. Set level between 0
and 7 with 0 being severe and 7 being all.
• config—Enables configuration debug output for CDP. Set level between
0 and 7 with 0 being severe and 7 being all.
• infra—Enables infrastructure debug output for CDP. Set level between 0
and 7 with 0 being severe and 7 being all.
Appendix A ACS Command Reference
OL-18996-01