Show Backup History - Cisco CSACS-1121-K9 Reference Manual

Appendix A ACS Command Reference
Example 5
acs/admin# show application status acs
ACS is not running.
Issue 'application start acs' command to start ACS.
acs/admin#
Related Commands Command
application install
application remove
application start
application stop
application upgrade

show backup history

To display the backup history of the system, use the show backup command in the EXEC mode.
Syntax Description
history
Defaults No default behavior or values.
Command Modes EXEC
Usage Guidelines None.
Examples
Example 1
acs/admin# show backup history
Wed Jul 18 12:55:21 UTC 2007: backup logs logs-0718.tar.gz to repository fileserver007:
success
Wed Jul 18 12:55:53 UTC 2007: backup full-0718.tar.gpg to repository fileserver007:
success
acs/admin#
Example 2
acs/admin# show backup history
backup history is empty
OL-18996-01
show backup history
Displays history information about any backups on the system.
Description
Installs an application bundle.
Removes or uninstalls an application.
Starts or enables an application.
Stops or disables an application.
Upgrades an application bundle.
CLI Reference Guide for the Cisco Secure Access Control System 5.1
Show Commands
A-67