Telnet; Terminal Length - Cisco CSACS-1121-K9 Reference Manual

Appendix A ACS Command Reference
Syntax Description ip-address
hostname
port number
Defaults No default behavior or values.
Command Modes Operator
EXEC
Usage Guidelines
None.
Examples
acs/admin# telnet 172.16.0.11 port 23
ACS.cisco.com login: admin
password:
Last login: Mon Jul
acs/admin#

terminal length

To set the number of lines on the current terminal screen for the current session, use the terminal length
command in the EXEC mode.
Syntax Description integer
Defaults 24 lines
Command Modes
EXEC
Usage Guidelines The system uses the length value to determine when to pause during multiple-screen output.
Examples
acs/admin# terminal length 0
acs/admin#
OL-18996-01
IP address of the remote system. Up to 64 alphanumeric characters.
Hostname of the remote system. Up to 64 alphanumeric characters.
(Optional) Indicates the port number of the remote host. From 0 to 65,535.
2 08:45:24 on ttyS0
terminal length integer
Number of lines on the screen. Contains between 0 to 511 lines, inclusive. A
value of zero (0) disables pausing between screens of output.
CLI Reference Guide for the Cisco Secure Access Control System 5.1
EXEC Commands
A-53