Cisco CSACS-1121-K9 Reference Manual page 173

Appendix A ACS Command Reference
url
user
Table A-20
Keyword
word
cdrom:
disk:
ftp:
nfs:
sftp:
tftp:
1. Server is the server name and path refers to /subdir/subsubdir. Remember that a colon (:) is required after the server for an
Defaults
No default behavior or values.
Command Modes
Configuration
Usage Guidelines None.
Examples
acs/admin(config)# repository myrepository
acs/admin(config-Repository)# url sftp://starwars.test.com/repository/system1
acs/admin(config-Repository)# user luke password skywalker
acs/admin(config-Repository)# exit
acs/admin(config)#
OL-18996-01
URL of the repository. Up to 80 alphanumeric characters (see
Configure username and password for access. Up to 30 alphanumeric
characters.
URL Keywords
Source of Destination
Enter repository URL, including server and path info. Up to 80 alphanumeric
characters.
Local CD-ROM drive (read only).
Local storage.
All local repositories are created on the /localdisk partition. When you
Note
specify disk:// in the repository URL, the system creates directories in a
path that is relative to /localdisk. For example, if you entered
disk://backup, the directory is created at /localdisk/backup.
You can run the show repository repository_name to view all the files in
the local repository.
Source or destination URL for an FTP network server. Use url ftp://server/path
Source or destination URL for an NFS network server. Use url nfs://server:path
Source or destination URL for an SFTP network server. Use url sftp://server/path
Source or destination URL for a TFTP network server. Use url tftp://server/path
Note You cannot use a TFTP repository for performing ACS upgrade.
NFS network server.
CLI Reference Guide for the Cisco Secure Access Control System 5.1
Configuration Commands
Table A-20).
1
.
1
.
1
.
1
.
A-135