Ssl Vpn Wizard Step 3 Of 6: User Settings - NETGEAR UTM25-100NAS - Prosecure Utm Appliance 25U No Sub Included Reference Manual

ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual
Table 8-2. SSL VPN Wizard Step 2: Domain Settings (continued)
Setting
Portal
Authentication Server The server IP address or server name of the authentication server for any type of
Authentication Secret The authentication secret or password that is required to access the authentication
Workgroup
LDAP Base DN
Active Directory
Domain

SSL VPN Wizard Step 3 of 6: User Settings

Figure 8-4
Note that Figure 8-4 contains some examples. Enter the settings as explained in
page 8-8, then click Next to go the following screen.
Note: Do not enter an existing user name in the in the User Name field, otherwise the
SSL VPN Wizard will fail and the UTM will reboot to recover its configuration.
Virtual Private Networking Using SSL Connections
Description (or Subfield and Description)
The portal that you selected on the first SSL VPN Wizard screen.You cannot change
the portal on this screen; the portal is displayed for information only.
authentication other than authentication through the local user database.
server for RADIUS, WIKID, or MIAS authentication.
The workgroup that is required for Microsoft NT Domain authentication.
The LDAP base distinguished name (DN) that is required for LDAP authentication.
The active directory domain name that is required for Microsoft Active Directory
authentication.
v1.0, September 2009
Table 8-3 on
8-7