Viewing The Wan Ports Status - NETGEAR UTM25-100NAS - Prosecure Utm Appliance 25U No Sub Included Reference Manual

ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual
2. Click the Status option arrow at the top right of the Port Triggering screen.The Port Triggering
Status screen appears in a popup window.
Figure 11-17
The Port Triggering Status screen displays the information that is described in
Table 11-13. Port Triggering Status Information
Item
#
Rule
LAN IP Address
Open Ports
Time Remaining

Viewing the WAN Ports Status

You can view the status of both of the WAN connections, the DNS servers, and the DHCP servers.
To view the status of the WAN1 port (UTM25) or WAN port (UTM10):
1. Select Network Config > WAN Settings from the menu. On the UTM25, the WAN Settings
submenu tabs appear, with the WAN1 ISP Settings screen in view (see
11-28, which shows the UTM25 screen). On the UTM10, the WAN ISP Settings screen
displays.
Monitoring System Access and Performance
Description (or Subfield and Description)
The sequence number of the rule on screen.
The name of the port triggering rule that is associated with this entry.
The IP address of the computer or device that is currently using this rule.
The incoming ports that are associated with this rule. Incoming traffic using one
of these ports is sent to the IP address that is listed in the LAN IP Address field.
The time remaining before this rule is released and made available for other
computers or devices. This timer is restarted when incoming or outgoing traffic is
received.
v1.0, September 2009
Table 11-13.
Figure 11-18 on page
11-27