Viewing The Utm Ipsec Vpn Connection Status - NETGEAR UTM25-100NAS - Prosecure Utm Appliance 25U No Sub Included Reference Manual

ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual
The VPN client system tray icon provides a variety of status indications, which are listed below.
Table 7-7.
System Tray Icon

Viewing the UTM IPsec VPN Connection Status

To review the status of current IPsec VPN tunnels:
1. Select Monitoring > Active Users & VPNs from the main menu. The Active Users & VPN
submenu tabs appear, with the Active Users screen in views
2. Click the IPSec VPN Connection Status submenu tab. The IPSec VPN Connection Status
screen displays. (Figure 7-18
Figure 7-18
Virtual Private Networking Using IPsec Connections
Status
The client policy is deactivated.
The client policy is deactivated but not connected.
The client policy is activated and connected.
A flashing vertical bar indicates traffic on the tunnel.
shows some policies as an example.)
v1.0, September 2009
7-19