Table of Contents
Advertisement
ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual
Configuring Advanced WAN Options
The advanced options include configuration of the maximum transmission unit (MTU) size, port
speed, UTM's MAC address, and setting a rate-limit on the traffic that is being forwarded by the
UTM.
To configure advanced WAN options:
1. Select Network Config > WAN Settings from the menu. On the UTM25, the WAN Settings
tabs appear, with the WAN1 ISP Settings screen screen in view. On the UTM10, the WAN ISP
Settings screen displays.
2. Click the Advanced option arrow. On the UTM25, the WAN1 Advanced Options screen
displays.
(Figure 3-13
Options screen displays.
Figure 3-13
3-22
shows the UTM25 screen.) On the UTM10, the WAN Advanced
v1.0, September 2009
Manually Configuring Internet and WAN Settings
Advertisement
Table of Contents
Troubleshooting
