Configuring User Accounts - NETGEAR UTM25-100NAS - Prosecure Utm Appliance 25U No Sub Included Reference Manual

ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual
Figure 9-4
3. Modify the idle timeout period in minutes in the Idle Timeout field. For a group that is
associated with a domain that uses the LDAP authentication method, configure the LDAP
attributes (in fields 1 through 4) as needed.
4. Click Apply to save your changes. The modified group is displayed in the List of Groups
table.

Configuring User Accounts

When you create a user account, you must assign the user to a user group. When you create a
group, you must assign the group to a domain that specifies the authentication method. Therefore,
you should first create any domains, then groups, then user accounts.
You can create different types of user accounts by applying pre-defined user types:
• Administrator. A user who has full access and the capacity to change the UTM configuration
(that is, read/write access).
• SSL VPN User. A user who can only log in to the SSL VPN portal.
• IPSEC VPN User. A user who can only make an IPsec VPN connection via a NETGEAR
ProSafe VPN Client, and only when the XAUTH feature is enabled (see
Extended Authentication (XAUTH)" on page
• Guest user. A user who can only view the UTM configuration (that is, read-only access).
Managing Users, Authentication, and Certificates
7-37).
v1.0, September 2009
"Configuring
9-9