Configuring A Vlan Profile - NETGEAR UTM25-100NAS - Prosecure Utm Appliance 25U No Sub Included Reference Manual

ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual
LDAP Server
A Lightweight Directory Access Protocol (LDAP) server allows a user to query and modify
directory services that run over TCP/IP. For example, clients can query email addresses, contact
information, and other service information using an LDAP server. For each VLAN, you can
specify an LDAP server and a search base that defines the location in the directory (that is, the
directory tree) from which the LDAP search begins.

Configuring a VLAN Profile

For each VLAN on the UTM, you can configure its profile, port membership, LAN TCP/IP
settings, DHCP options, and DNS server.
To add or edit a VLAN profile:
1. Select Network Config > LAN Settings from the menu. The LAN submenu tabs appear, with
the LAN Setup screen in view (see
example).
Note: For information about how to manage VLANs, see
Port-Based VLANs" on page
configure a VLAN profile.
Figure 4-2
4-6
Figure 4-2, which shows two VLAN profiles as an
4-2. The information below describes how to
v1.0, September 2009
"Managing the UTM's
Edit
Add
LAN Configuration