Setting User Login Policies - NETGEAR UTM25-100NAS - Prosecure Utm Appliance 25U No Sub Included Reference Manual

ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual
4. Click Apply to save your settings. The user is added to the List of Users table.
To delete one or more users:
1. In the List of Users table, select the checkbox to the left of the user that you want to delete or
click the select all table button to select all users. You cannot delete a default user.
2. Click the delete table button.

Setting User Login Policies

You can restrict the ability of defined users to log into the UTM's Web management interface. You
can also require or prohibit logging in from certain IP addresses or from particular browsers.
Configuring Login Policies
To configure user login policies:
1. Select Users > Users from the menu. The Users screen displays (see
2. In the Action column of the List of Users table, click the policies table button for the user for
which you want to set login policies. The Policies submenu tabs appear, with the Login
Policies screen in view.
Figure 9-7
3. In the User Login Policies section of the screen, make the following selections:
• To prohibit this user from logging in to the UTM, select the Disable Login checkbox.
• To prohibit this user from logging in from the WAN interface, select the Deny Login from
WAN Interface checkbox. In this case, the user can log in only from the LAN interface.
9-12 Managing Users, Authentication, and Certificates
v1.0, September 2009
Figure 9-5 on page 9-10).