ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual
Table 2-5. Setup Wizard Step 5: Email Security Settings (continued)
Setting
IMAP
Scan Exceptions
The default maximum file or message size that is scanned is 2048 KB, but you can define a maximum size
of up to 10240 KB. However, setting the maximum size to a high value might affect the UTM's performance
(see
"Performance Management" on page
From the pull-down menu, specify one of the following actions when the file or message exceeds the
maximum size:
• Skip. The file is not scanned but skipped, leaving the end user vulnerable. This is the default setting.
• Block. The file is blocked and does not reach the end user.
Setup Wizard Step 6 of 10: Web Security
Figure 2-12
Enter the settings as explained in
screen.
Using the Setup Wizard to Provision the UTM in Your Network
Description (or Subfield and Description)
From the IMAP pull-down menu, specify one of the following actions when an
infected e-mail is detected:
• Delete attachment. This is the default setting. The e-mail is not blocked, but
the attachment is deleted, and a log entry is created.
• Log only. Only a log entry is created. The e-mail is not blocked and the
attachment is not deleted.
10-1).
Table 2-6 on page
v1.0, September 2009
2-20, then click Next to go the following
2-19