Front Panel Leds Of The S3100-Tp-Ei Series - H3C LS-3100-16TP-EI-H3-A-O Installation Manual

Installation Manual
H3C S3100 Series Ethernet Switches

1.4.2 Front Panel LEDs of the S3100-TP-EI Series

I. Power LED
Table 1-9 Description of the power LED on the S3100-TP-EI series
LED
Power LED
II. Port LED
Table 1-10 describes the Link/Act LED of the auto-sensing 10/100Base-TX port.
Table 1-10 Description of the Link/Act LED on the S3100-TP-EI series
Link/Act LED (green)
Table 1-11 describes the Speed LED of the 10/100Base-TX port.
Table 1-11 Description of the 10/100Base-TX port Speed LED of the S3100-TP-EI
series
Auto-sensing
10/100Base-TX port
speed LED (green)
For the description of the Link/Act LED of the Combo port, see Table 1-10. When the
port is connected correctly, the Speed LED indicates the operating speeds of the
Combo port, as shown in Table 1-12.
Mark on the panel
Power
LED Status
ON
Blinking
OFF
LED Status
ON
OFF
Status
ON The switch is powered on.
OFF The switch is powered off.
The port is connected properly.
The port is in the active state and there
is traffic on the port.
The port is not connected or is
incorrectly connected.
The port is operating at 100 Mbps.
The port is operating at 10 Mbps.
1-27
Chapter 1 Product Introduction
Description
Description
Description