H3C LS-3100-16TP-EI-H3-A-O Installation Manual page 50

Installation Manual
H3C S3100 Series Ethernet Switches
(1) Screw hole used to fix the mounting ear to the cabinet (Use one M6 screw)
Figure 3-2 Appearance of a rear mounting ear
When you install S3100 Series Ethernet Switches into 19-inch standard cabinets, you
should select front mounting ears with a proper length (L1 as shown in Figure 3-1)
according to the physical dimensions of switches. For the selection of front and rear
mounting ears, see Table 3-3.
Table 3-3 Selection of mounting ear for S3100 Series Ethernet Switches
S3100-26T-SI
S3100-26C-SI
S3100-26C-EPON-EI
S3100-16T-SI
S3100-16C-SI
S3100-16C-EPON-EI
S3100-8T-SI
S3100-8C-SI
S3100-8C-EPON-EI
S3100-TP
-EI
Physical dimensions
Model
42 × 436 × 240 mm
(1.65 × 17.2 × 9.4 in.)
42 × 436 × 200 mm
(1.65 × 17.2 × 7.9 in.)
42 × 326 × 200 mm
(1.65 × 12.8 × 7.9 in.)
43.6 × 440 × 160 mm
S3100-2
6TP-EI
(1.7 × 17.3 × 6.3 in.)
S3100-1 43.6 × 360 × 160 mm
6TP-EI (1.7 × 14.2 × 6.3 in.)
43.6 × 230 × 160 mm
S3100-8
TP-EI
(1.7 × 9.1 × 6.3 in.)
Configuration
type of front
(H × W × D)
mounting ear
Standard
Standard
Optional
Standard
Optional
Optional
3-3
Chapter 3 Installation
Configuration
type of rear
mounting ear
—
—