Technical Specifications; S5170-Ei Switch Series - H3C S5170-EI Series Hardware Information

NOTE:
• Switches of the same model but different PIDs might differ in hardware and software features.
You can view the PID of a switch on the label located on its rear panel or top panel.
• The available chassis models and accessories vary by country and region. This document
describes only the preceding models. For the chassis models and accessories available in your
country or region, contact the local H3C marketing personnel.

Technical specifications

S5170-EI switch series

Table1-2 Technical specifications for non-PoE switch models (1)
Item
Dimensions
(H × W × D)
Weight
Console port
SFP port
SFP+ port
10/100/1000
BASE-T
autosensing
Ethernet port
Input voltage
Minimum
power
consumption
Maximum
power
consumption
Chassis
leakage
current
compliance
Melting
current of
power supply
fuse
Operating
temperature
Operating
humidity
S5170-28S-EI
43.6 × 440 × 160 mm (1.72 ×
17.32 × 6.30 in)
≤ 2.2 kg (4.85 lb)
1 × serial console port
N/A
4
24
AC input:
•
Rated voltage range:
100 VAC to 240 VAC @
50 Hz or 60 Hz
•
Max voltage range: 90
VAC to 264 VAC @ 47
Hz to 63 Hz
17 W
37 W
UL 62368-1/EN 62368-1/IEC 62368-1/UL 60950-1/EN 60950-1/IEC 60950-1/GB4943.1
2 A/250 V
–5°C to +45°C (23°F to 113°F)
5% RH to 95% RH, noncondensing
S5170-54S-EI
43.6 × 440 × 260 mm (1.72 ×
17.32 × 10.24 in)
≤ 4.0 kg (8.82 lb)
N/A
6
48
AC input:
•
Rated voltage range:
100 VAC to 240 VAC @
50 Hz or 60 Hz
•
Max voltage range: 85
VAC to 264 VAC @ 47
Hz to 63 Hz
19 W
53 W
3.15 A/250 V
S5170-36F-EI
43.6 × 440 × 260 mm (1.72 ×
17.32 × 10.24 in)
≤ 3.5 kg (7.72 lb)
24
4
8
AC input:
•
Rated voltage range:
100 VAC to 240 VAC @
50 Hz or 60 Hz
•
Max voltage range: 90
VAC to 264 VAC @ 47
Hz to 63 Hz
27 W
54 W
3.15 A/250 V