H3C LS-3100-16TP-EI-H3-A-O Installation Manual page 77

Installation Manual
H3C S3100 Series Ethernet Switches
Press Ctrl-B to enter Boot Menu... 2
The last line prompts you to enter the Boot Menu and waits two seconds for your
response.
Note:
The system has two startup modes: normal and fast. The normal startup mode
spends a little more time than the fast startup mode because the former takes more
self-test operations.
By default, the system starts up in fast mode and the waiting time here is two
seconds. While, if you set the startup mode to normal, this waiting time is five
seconds. For the setting of the startup mode, refer to the next section.
If you press <Ctrl+B> within 2 seconds, the Boot Menu is displayed:
1. Download application file to flash
2. Select application file to boot
3. Display all files in flash
4. Delete file from flash
5. Modify bootrom password
6. Enter bootrom upgrade menu
7. Skip current configuration file
8. Set bootrom password recovery
9. Set switch startup mode
0. Reboot
Enter your choice(0-9):
If you perform no operation or press a key other than <Ctrl+B> within two seconds,
once the waiting time becomes zero, the system begins to automatically start up
and the following information is displayed:
Auto-booting...
Decompress Image...................................................
...................................................................
Copyright(c) 2004-2007 Hangzhou H3C Technologies Co., Ltd.
Creation date
CPU Clock Speed : 200MHz
BUS Clock Speed : 33MHz
Memory Size
Mac Address
BOOT MENU
: Apr 15 2007, 10:12:36
: 64MB
: 000fe20f3100
4-5
Chapter 4 First Power-on