Installation Manual
H3C S3100 Series Ethernet Switches
1)
Select [Start/Program/Accessories/Communications/HyperTerminal] to enter
the HyperTerminal window, where click the
connection. The system displays the Connection Description interface, as shown
in the following figure.
Figure 4-2 Connection description interface of HyperTerminal
2)
Type in the name of the new connection in the connection description interface
and click <OK>. The system pops up the following interface. Select the serial port
to be used from [Connect using].
Figure 4-3 Setting the serial port used by the HyperTerminal connection
4-2
Chapter 4 First Power-on
icon to establish a new