H3C LS-3100-16TP-EI-H3-A-O Installation Manual page 80

Installation Manual
H3C S3100 Series Ethernet Switches
Please check port leds...............FINISHED!
User interface aux0 is available.
Press ENTER to get started.
The appearance of "Press ENTER to get started" indicates that the switch finishes the
auto-startup.
Press <Enter>, and the following prompt is displayed:
<H3C>
You can configure the switch now.
Note:
The H3C S3100 Series Switches provides abundant command views. For detailed
descriptions about the configuration commands and CLI, refer to H3C S3100 Series
Ethernet Switches
Command Manual.
PHY selftest...............................OK!
Operation Manual and H3C S3100 Series Ethernet Switches
4-8
Chapter 4 First Power-on