Table of Contents
Advertisement
Installation Manual
H3C S3100 Series Ethernet Switches
Three installation locations for screw 1 (select one according to the actual requirement)
Three installation locations for screw 1 (select one according to the actual requirement)
Screw 1
Screw 1
Screw 1: Load-bearing screw
Figure 3-5 Fix front mounting ears and load-bearing screws
Note:
There are three positions to mount a load-bearing screw on both sides of a switch. You
should select a proper position according to the actual requirements. The rear
mounting ears tightly contacted with the load-bearing screws can support the switch.
4)
Select a position to install the switch and fix the rear mounting ears to the rear
brackets with screws and captive nuts, as shown in Figure 3-6.
Figure 3-6 Fix rear mounting ears
Front mounting ear
Front mounting ear
3-6
Chapter 3 Installation
Screw 1
Screw 1
Front
Front
Front panel
Front panel
mounting ear
mounting ear
Rear square-holed rack
Hide quick links:
Advertisement
Table of Contents
