H3C LS-3100-16TP-EI-H3-A-O Installation Manual page 84

Installation Manual
H3C S3100 Series Ethernet Switches
2. Set FTP protocol parameter
3. Set XMODEM protocol parameter
0. Return to boot menu
Enter your choice(0-3):
Step 2: Enter 3 in the above menu to load the Boot ROM software using XModem. The
system displays the following download bits per second setting menu:
Please select your download baudrate:
1.* 9600
2. 19200
3. 38400
4. 57600
5. 115200
0. Return
Enter your choice (0-5):
Step 3: Choose an appropriate download bits per second. For example, if you select 5,
the 115200 bps rate is chosen, and the system displays the following information:
Download baudrate is 115200 bps
Please change the terminal's baudrate to 115200 bps and select XMODEM protocol
Press enter key when ready
Now, press <Enter>.
Note:
If you have chosen 9600 bps, you do not need to modify the HyperTerminal's bits per
second, and therefore you can skip Step 4 and 5 below and proceed to Step 6 directly.
In this case, the system will not display the above information.
Step 4: Select [File/Properties] in the HyperTerminal window, click <Configuration> in
the popup dialog box, and select the bits per second of 115200 bps in the appeared
console port configuration dialog box.
Chapter 5 Boot ROM and Host Software Loading
5-4