Using Scsi; Running The Valueloader System Test - Freecom VALUELOADER DLT User Manual

ValueLoader Administration

Running the ValueLoader System Test

3

Using SCSI

Running the ValueLoader System Test
46 ValueLoader DLT VS80/DLT VS160 Tape Autoloader User Manual
If you exported a data cartridge to make room for the code
8
upgrade cartridge, be sure to import the cartridge to its original
slot. See Importing Cartridges
After a firmware update, the firmware revision
Note:
displayed on the LCD is not updated until the
ValueLoader is power cycled.
The Web site has the files and instructions necessary to update
drive and ValueLoader firmware via SCSI. Refer to our Web site
for details.
The System Test option cycles the ValueLoader through the
process of loading, calibrating, and unloading all cartridges in the
carousel. Running a System Test verifies the operational
soundness of both the ValueLoader and tape drive. The System
Test continues indefinitely until you press the
regular backup and restore operations are suspended while a
System Test is in progress.
At least one cartridge must be in inventory before
Note:
running System Test.
To run a System Test:
From the Home screen or main menu, press the
1
until "Diagnostics" appears on the top line of the LCD screen.
Press the
2 [Enter]
LCD screen.
Press the
3 [Enter]
on page 28 for instructions.
button to select. "System Test" appears on the
button to begin the test.
3
button. All
[Cancel]
or button
[+] [–]