Loading Cartridges; Figure 13 Exporting A Cartridge - Freecom VALUELOADER DLT User Manual

Operating the ValueLoader
Using Cartridges
Figure 13 Exporting a
Cartridge
Loading
2
Cartridges
30 ValueLoader DLT VS80/DLT VS160 Tape Autoloader User Manual
From the Home Screen or main menu, press the
1
button until "Commands" appears on the top line of the LCD
screen. Press
[Enter]
Press the or
2 [+] [–]
screen. Press
[Enter]
Press the or
3 [+] [–]
on the LCD screen. Press the
the option to export from an empty slot.
When "Remove Cartridge" appears on the LCD screen and the
4
cartridge is ejected through the Import/Export slot, remove the
exported cartridge from the ValueLoader, and press the
button.
Repeat steps 3 and
5
Press the
6 [Cancel]
cartridges.
Make sure the LCD screen indicates that the desired slots are
7
empty.
This option loads a cartridge from the ValueLoader carousel into
the tape drive. To use this option, follow these steps:
From the Home Screen or main menu, press the
1
until "Commands" appears on the top line of the LCD screen.
Then, press
[Enter]
.
button until "Export" appears on the LCD
.
button until the desired slot number appears
button. You are not given
[Enter]
4 as needed for any additional cartridges.
button when you are done exporting
.
or
[+] [–]
[Enter]
or button
[+] [-]