Unpacking The Valueloader - Freecom VALUELOADER DLT User Manual

Unpacking the ValueLoader

ValueLoader DLT VS80/DLT VS160 Tape Autoloader User Manual
Requirement
Humidity
Clearance
Before you begin, clear a desk or table so that you can unpack the
ValueLoader. You also need to select an open 2U computer rack
location or a desktop location near the server that is to be the host
for the ValueLoader.
If the room temperature you are working in differs
Caution:
from the shipping or storage temperature by 15° C
(30° F) or more, let the ValueLoader acclimate to the
surrounding environment for at least 12 hours before
opening the shipping carton.
Unpack and inspect the ValueLoader for shipping damage by
doing the following:
Clear a table or desk so that you have room to unpack the
1
ValueLoader.
Inspect the shipping box for damage. If you notice any
2
damage, report it to the shipping company immediately.
Open the shipping box and remove the accessories package.
3
Set the accessories package aside for now.
Description
20-80% RH
Back: Minimum of 15.4 cm (6 inches)
Front: Minimum of 30.8 cm (12 inches)
Sides: Minimum of 5.08 cm (2 inches)
Installing the ValueLoader

Unpacking the ValueLoader

1
7