Firmware Revision - Freecom VALUELOADER DLT User Manual

ValueLoader Administration
Retrieving Information About the ValueLoader
3

Firmware Revision

48 ValueLoader DLT VS80/DLT VS160 Tape Autoloader User Manual
Press the or
2 [+] [–]
the LCD screen. The LCD screen also displays the quantity of
errors and events currently stored in the event log.
Press the
3 [Enter]
event.
Press the or
4 [+] [–]
Press when done.
5 [Cancel]
This option displays the revision of the firmware currently
installed in the ValueLoader.
The tape drive and ValueLoader firmware are a single
Note:
image, but displays as three firmware numbers on the
front panel.
To use this option, follow these steps:
From the Home screen or main menu, press the
1
until "Information" appears on the top line of the LCD screen.
Press the
2 [Enter]
Press the or
3 [+] [–]
LCD screen.
The LCD screen displays the revision of the firmware currently
installed in the ValueLoader.
Press when done.
4 [Cancel]
After a firmware update, the firmware revision
Note:
displayed on the LCD will not be updated until the
ValueLoader is power cycled.
button until "View Event Log" appears on
button to access the most recently logged
button to display each event in the log.
button to access the available options.
button until "Firmware Rev" appears on the
or button
[+] [–]