Figure 12 Importing a
Cartridge
Exporting
2
Cartridges
ValueLoader DLT VS80/DLT VS160 Tape Autoloader User Manual
Press the
or
4
[+]
[–]
screen. Press
[Enter]
Press the
or
5
[+]
[–]
on the LCD screen and press the
given the option to import a cartridge to an occupied slot.
When "Insert Cartridge Slot" appears on the LCD screen and
6
the Import/Export slot opens, insert the desired data cartridge
into the Import/Export slot so that the write-protect switch is
facing out from the ValueLoader and toward the right.
If you are using the Operator's Panel to clean the
Note:
drive, import the cleaning cartridge only when the
front panel indicates that cleaning is needed. You
may keep a cleaning cartridge in the ValueLoader if
the backup software can manage the drive cleaning.
Repeat steps
5
and
7
Press the
8
[Cancel]
cartridges.
Verify that the LCD screen shows that the desired slots have
9
cartridges installed.
This option moves a cartridge from a specific slot to the Import/
Export slot. To export one or more cartridges from the
ValueLoader, follow these steps:
button until "Import" appears on the LCD
to select.
button until the desired slot number appears
[Enter]
6
as needed for additional cartridges.
button when you have finished importing
Operating the ValueLoader
Using Cartridges
button. You are not
29