Unloading Cartridges; Write-Protecting Cartridges - Freecom VALUELOADER DLT User Manual

Operating the ValueLoader
Using Cartridges
Unloading
2
Cartridges
Write-Protecting
2
Cartridges
32 ValueLoader DLT VS80/DLT VS160 Tape Autoloader User Manual
This option unloads the cartridge from the tape drive into its
original slot. To use this option, follow these steps:
From the Home Screen or main menu, press the
1
button until "Commands" appears on the top line of the LCD
screen. Press
[Enter]
Press the or
2 [+] [–]
the LCD screen. Press the
from the tape drive.
Status messages appear while the cartridge is unloading.
3
"Drive Empty" appears when the operation is complete.
Press the
4 [Cancel]
cartridge.
All cartridges have a write-protect switch to prevent accidental
erasure or overwriting of data. Before loading a cartridge into the
ValueLoader, make sure the write-protect switch on the front of
the cartridge is positioned as desired:
• Slide the switch to the
small orange rectangle is visible, indicating the cartridge is
write-protected.
• Slide the switch to the
data to the cartridge. The lock icon on the switch indicates that
the cartridge is write-enabled.
.
button until "Unload Cartridge" appears on
button to unload the cartridge
[Enter]
button when you are done unloading the
to write-protect the cartridge. A
left
to allow the ValueLoader to write
right
or
[+] [–]