Setting The Scanner Lamp Off Time; Setting The Speaker Volume - Xerox Phaser 6115MFP User Manual

Setting the Scanner Lamp Off Time

Select the length of time the product is idle before the scanner unit lamp is turned off.
1. From the main screen, press the Menu/Select button to enter the
2. Scroll to the
Lamp Off Time
then press the Menu/Select button.
3.
Select from the following options by using the Left Arrow or Right Arrow button.
■ : The lamp turns off after 4 hours of being idle.
HRS
■ : The lamp turns off as soon as the product enters Energy Save mode.
E-Star
4. Press the Menu/Select button to save the settings.
Using the MFP ControlCentre
1. Open the MCC, connect to your product and download the current .dat file.
2.
Click the Menu button.
3. Select the Machine Setup tab.
4.
Under Lamp Off Time, select either 4 hours or Energy Saver, and then click OK.
5. Click the Upload button to save the new settings to the product.
Note: Cannot be set from CentreWare IS.

Setting the Speaker Volume

Using the Control Panel
1.
From the main screen, press the Menu/Select button to enter the
2. Scroll to the
Speaker Volume
then press the Menu/Select button.
3. Select from the following options by using the Up Arrow or Down Arrow button.
Set the fax buzzer and control panel beep to
4. Press the Menu/Select button to save the settings.
Using the MFP ControlCentre
1. Open the MCC, connect to your product and download the current .dat file.
2.
Click the Menu button.
3. Select the Machine Setup tab.
4. Under Speaker Volume, select either High, Low, or Off, and then click OK.
5.
Click the Upload button to save the new settings to the product.
Note:
Cannot be set from CentreWare IS.
menu, or press number 6 on the alphanumeric keypad, and
menu, or press number 7 on the alphanumeric keypad, and
High
Phaser® 6115MFP Multifunction Product
3-9
Configuring the Product
Machine Setup
Machine Setup
, Low , or Off .
menu.
menu.