Xerox Phaser 6115MFP User Manual page 136

Fax Send Setup Menu
Use the fax send setup menu to set the image quality settings for fax transmissions.
Menu Item
1: Scan Density
2: Resolution
3: Header
Fax Receive Setup Menu
Use the fax receive setup menu to set the default settings for incoming faxes.
Menu Item
1: Memory
2: Phone Rings
3: Scale to Fit
Description
Sets the density of scanned, fax documents.
Sets the default scanning resolution.
STD
: For documents containing normal text.
Fine
: For documents containing small text.
S/F
: Super fine, for documents such as newspapers or those
containing detailed illustrations.
H/T
: Half tone, for documents with shades, such as photos. When
selecting half tone, the control panel will prompt you for a detailed
setting of STD, Fine, or S/F.
Prints the header information on all fax transmissions.
Description
Turns memory receive ON or OFF.
When memory receive mode is set to on, faxes received can be
stored in the product memory and printed at a specified time.
A password can be set to specify the start time or end time of a
memory reception, or to cancel. The start and end times are valid
until memory receive is turned off.
For specifying memory receive settings, see
on page 9-4.
Sets the number of rings before the call is answered by the product.
1 to 16 rings, depending on your region.
Sets whether documents longer than the currently loaded paper size
are printed at a reduced size, split over multiple pages, or discarded.
ON
: The document is printed to fit the paper.
OFF
: The document is printed at full size and is split onto multiple
pages.
CUT
: The document is printed, but any part that does not fit onto
the currently loaded paper is not printed.
Phaser® 6115MFP Multifunction Product
9-5
Managing Fax Functions
Managing Fax Settings