Setting The Date And Time; Setting The Date And Time In Xerox ® Centreware ® Internet Services - Xerox WorkCentre 7800 series Administrator's Manual

Setting the Date and Time

Setting the Date and Time in Xerox
®
1. In Xerox CentreWare
Click Date and Time.
2.
3. Under Date and Time Setup, select:
− Automatic using NTP to allow the NTP service to set the time automatically.
Manual (NTP Disabled) to set the date and time manually.
−
4. If you are using an NTP server, select the address type. Options are IPv4 Address or Host Name.
Type the appropriately formatted address, alternate address, and port numbers. The default port
number is 123.
Note: Changes to these settings cause the printer to restart.
5. Select the date and time format, and type the date and time in the appropriate fields. Select the
Display 24 hour clock check box to show the time in 24 hour format.
6. Under Time Zone, select your time zone from the drop-down menu.
7. Click Apply.
®
®
Internet Services, click Properties > General Setup.
®
Xerox WorkCentre
®
CentreWare Internet Services
®
7800/7800i Series Color Multifunction Printer
System Administrator Guide
Initial Setup
29