Setting the Copy Quality
Copies can be printed in either standard (600 x 300) or enhanced (600 x 600) mode.
To set the copy quality:
Using the MFP ControlCentre
1.
Open the MCC, connect to your product and download the current .dat file.
2.
Click the Menu button.
3.
Select the Copy Settings tab.
4.
From the Quality list, select Standard or Enhanced.
5.
Select OK to save the new settings.
6.
Upload the new settings to the product.
Using the Control Panel
1.
On the control panel, press the Copy button.
2.
Press the Quality button twice.
3.
Use the Right Arrow and Left Arrow button to select
4.
Press the Menu/Select button to accept the new setting.
Setting the Copy Density
You can lighten or darken the density on your printed copies.
To set the copy density level:
Using the MFP ControlCentre
1.
Open the MCC, connect to your product and download the current .dat file.
2.
Click the Menu button.
3.
Select the Copy Settings tab.
4.
Using the Density slider, move the slider left or right the lighten or darken the copy
density.
5.
Select OK to save the new settings.
6.
Upload the new settings to the product.
Using the Control Panel
1.
On the control panel, press the Copy button.
2.
Press the Light/Dark button.
3.
Use the Right Arrow and Left Arrow button to adjust the copy density.
4.
Press the Menu/Select button to accept the new setting.
Phaser® 6115MFP Multifunction Product
7-4
Adjusting Copy Options
or
.
STD
ENH