Xerox Phaser 6115MFP User Manual page 204

Image defects
Probable Causes
The laser lens is dirty.
A toner cartridge may be leaking.
A toner cartridge may be defective.
The imaging unit may be defective.
Lateral lines or bands appear on image
Probable Causes
The product is not level.
The media path is dirty with toner.
One or more of the toner cartridges may be
defective.
The imaging unit is defective.
Phaser® 6115MFP Multifunction Product
11-31
Print-Quality Problems
Solutions
Clean the laser lens.
Remove the toner cartridges and check for
damage. If it is damaged, replace it.
Remove the toner cartridge with the color
causing the abnormal image.
Replace it with a new toner cartridge.
Remove the imaging unit and check for
damage. If it is damaged, replace it.
Solutions
Place the product on a flat, hard, level surface.
Print several sheets and the excess toner
should disappear.
Remove the toner cartridges and check each
for damage. If one or more is damaged,
replace it.
Remove the imaging unit and check for
damage. If it is damaged, replace it.