Scan To Email Using The Document Glass - Xerox Phaser 6115MFP User Manual

Scan to Email Using the Document Glass

To scan documents to email using the document glass:
For information on changing the image size, see
■
page 8-9.
1. Press the Scan button to enter scan mode.
2.
Lift the ADF cover and place the document facedown on the document glass as shown
below.
3. Gently close the ADF cover.
4.
Specify the email address of the recipient, see
5. Enter a subject line using the alphanumeric keypad, and then press the
Menu/Select button.
6. Enter any additional CC email addresses, and then press the Menu/Select button.
7. Use the Left Arrow or Right Arrow buttons select
mode, and then press the Menu/Select button.
8. Continue setting the desired scan mode settings.
■ For information on specifying detailed settings, such as data format or compression
encoding, and scan resolution, see
■ For information on changing the image size, see
page 8-9.
■ To change the size of the scanned image, see
page 8-9.
9. Using the Left Arrow or Right Arrow button, select
Menu/Select button to start scanning.
10. When scanning a document containing several pages, place the next page on the document
glass when the message
Menu/Select button.
11. Repeat Step 10 until all pages of the document have been scanned.
12.
Press the Start button to send the transmission.
6115-074
Changing the Scan Mode Settings
appears on the control panel, and then press the
NEXT PAGE?
Phaser® 6115MFP Multifunction Product
8-7
Scan to Email (Network Only)
Changing the Scanned Image Size
6115-075
Specifying a Recipient on page 8-8.
, , or
Color Gray B&W
Changing the Scanned Image Size
Changing the Scanned Image Size
and then press the
BOOK
on
as the color
on page 8-9.
on
on