Adjusting Copy Options; Setting The Original Document Type - Xerox Phaser 6115MFP User Manual

Adjusting Copy Options

This section includes:
■

Setting the Original Document Type

Setting the Copy Quality
■
■ Setting the Copy Density
■ Collating Copies on page 7-5
■ Selecting Paper Priority
■ Specifying a Zoom Ratio
If you are connected to your product via USB, you can change copy settings through the MFP
ControlCentre (MCC). For instructions on using the MFP ControlCentre, see the chapter on
Product Management on page 3-1.
If you are connected to your product over a network, use the control panel to adjust copy
options.
Note:
Pressing the Stop/Reset button returns all settings to their default values.
Setting the Original Document Type
For the best print quality, set the original document type to a mode that most closely matches
your originals.
To set the original document type:
Using the MFP ControlCentre
1. Open the MCC, connect to your product and download the current .dat file.
2. Click the Menu button.
3. Select the Copy Setup tab.
4.
Select Mix, Text, or Photo from the items.
If you selected Text:
■ Select Auto, to let the product manage the density level.
■ Select Manual if you want to manually adjust the density level.
5. Select OK to save the new settings.
6.
Upload the new settings to the product.
Using the Control Panel
1.
On the control panel, press the Copy button.
2. Press the Quality button once.
3.
Use the Right Arrow or Left Arrow button to select
4. Press the Menu/Select button to accept the new setting.
on page 7-3
on page 7-4
on page 7-4
on page 7-6
on page 7-7
Phaser® 6115MFP Multifunction Product
7-3
Adjusting Copy Options
Mix, Text, or Photo .