Basic Copying; Loading Originals - Xerox Phaser 6115MFP User Manual

Basic Copying

User either the Automatic Document Feeder (ADF) or the document glass to make copies.
Load the originals to be copied and follow the steps below to make copies.
For information on copy settings, see

Loading Originals

Document Glass
Lift the ADF cover and place the original
facedown, towards the back, left corner of the
document glass as shown.
1. On the control panel, press the Copy button.
2.
Specify the copy settings, see
3. Specify the number of copies using the control panel keypad. The number of copies
appears on the upper, right corner of the display.
4. Press the Start-Color button for color copies or Start-B&W button for black and white
copies.
■ If you placed originals in the ADF, copying continues until the document feeder is
empty.
■ To stop copying, press the Stop/Reset button.
Note: If the Stop/Reset button is pressed while copying
appears on the control panel. To continue the copy job, press the Start-Color or Start B&W
button.
Adjusting Copy Options
6115-074
6115-075
Automatic Document Feeder
Insert originals faceup with the top of the page
entering the feeder first. Adjust the paper guides
so they fit against the originals.
Adjusting Copy Options
Phaser® 6115MFP Multifunction Product
7-2
Basic Copying
on page 7-3.
6115-078
on page 7-3.
Press the Start Key To Resume