Product Management Software Problems - Xerox Phaser 6115MFP User Manual

Product Management Software Problems

CentreWare IS Cannot be Accessed
Probable Causes
The CentreWare IS Administrator's password is
incorrect.
Your network settings are incorrect.
The MFP ControlCentre
Probable Causes
The MCC software has not been installed.
There is a problem with your USB connection.
Phaser® 6115MFP Multifunction Product
11-22
Product Troubleshooting
Solutions
The CentreWare IS Administrator password
has a 6-character minimum and a
16-character maximum.
Verify your network settings are correct.
Solutions
Install the MCC software from your
documentation CD ROM.
Verify you are using the correct USB cabling.
Verify your USB port is working correctly.