Xerox Phaser 6115MFP User Manual page 208

Message
TOP COVER OPEN
CLOSE TOP COVER
*JOB CANCELED*
INCORRECT PAPER
LOAD PAPER(XX)
MEDIA TYPE
ERROR
LOAD CORRECT
MEDIA
MEMORY FULL
PRESS ANY KEY
LOAD CORRECT
PAPER
*NO NETWORK
SETTING*
*NOT CORRECT
E-MAIL ADDRESS*
*NOT REGISTERD*
Definition
The engine cover is open.
While a document was being
scanned from the original glass
in Scan mode, more than one
minute had passed after the first
page of the document was
scanned or the data could not be
sent. Therefore, the scan job
was automatically canceled.
ID card copying is specified, but
paper of a size other than A4,
Letter or Legal is loaded in the
paper tray.
TRANSPARENCY was selected
as the paper type, but paper
other than transparencies is
loaded into Tray 1.
A setting other than
TRANSPARENCY was selected
as the paper type, but
transparencies are loaded into
Tray 1.
The machine has received more
data than can be processed with
its internal memory.
Duplex (2-Sided) printing is
specified, but no paper
compatible with duplex (2-Sided)
printing is loaded.
The network settings had not
been completely specified when
the machine was switched to
Scan mode.
An email address was not
programmed in the one-touch
dial key or speed dial number.
(This message appears if a fax
number or email address is
programmed for group dialing.)
An email address was not
programmed in the one-touch
dial key or speed dial number.
Phaser® 6115MFP Multifunction Product
11-35
Status, Error, and Service Messages
Solutions
Close the engine cover.
Turn the machine off, and then, after
waiting a few seconds, turn it on
again.
When sending multiple pages, for
example, from a book, scan the first
page, and then scan the next page
within one minute.
Load A4, Letter- or Legal-size paper
in the paper tray. ID card copying
cannot be used with paper of a size
other than A4, Letter or Legal.
Load the correct media type in Tray 1.
Cancel the current job.
Turn the machine off, and then, after
a few seconds, turn it on again.
Decrease the amount of data to be
printed (for example, by decreasing
the resolution), and then try printing
again.
Load paper compatible with duplex
(2-Sided) printing. Only plain and
letterhead paper are compatible with
duplex (2-Sided) printing.
Before scanning in Scan mode,
specify the network settings in the
NETWORK SETTING menu.
Before sending scan data using one-
touch dial keys or speed dial
numbers, register an email address
with the one-touch dial key or speed
dial number.