How to Start Scanning
Selects whether to start scanning automatically or by pressing the <Start> key after
documents have been loaded. The default value when shipped from the factory is [Auto
Start].
Auto Start
Manual Start
Operation Procedure
1
Select [How to Start Scanning] on
the [Custom Presets – System
Presets] screen.
2
Select either [Auto Start] or [Manual
Start] as the method to start
scanning.
3
Press the [Done] button.
The specified values will be saved and
the screen will return to the [Custom
Presets – System Presets] screen.
112
Chapter 7 Custom Presets / Meter Check
Starts scanning automatically after a document has been
loaded.
Starts scanning when the <Start> key is pressed for each
document.
Custom Presets – System Presets
Time & Date...
How to start
scanning...
Other System
Presets...
How to start scanning
Auto Start
Manual Start
Done
Auto Clear/
Timer...
Backlight Off.
Attention
Scan Speed...
Tone...
Cancel
Done
Auto Start :
Start scanning automatically
when document is set.
Manual Start :
Start scanning after 'Start'
button is pressed.