Xerox 6030 User Manual page 259

Input size
A3
Enlarged
Examples of the Paper Sizes that can be Output with Media Mapping
It is possible to print out the following paper sizes for the ISO A series.
Output Size
Size mapping is applied to the image with an input size of A3, which is then enlarged
to an A2 output size (enlarged by 141.4%).
Media mapping is applied as the output size is A2, and the image is printed on the
A1 roll media (rotated by 90 degrees and output).
Output size
A2
A0 A0 roll media
A1
A0 roll media (90-degree rotation), A1 roll media
A2 A1 roll media (90-degree rotation), A2 roll media
A3
A2 roll media (90-degree rotation), A3 roll media
A4 A3 roll media (90-degree rotation)
• It is possible to set paper sizes other than those listed above with Media mapping, but
this may result in the images breaking up or the paper being too large, leading to
unsatisfactory output.
• It is possible to set the priority on roll media with the copier specification setup
function if the printer is equipped with a copier function. Refer to "2.3 Setting up
Media" (page 19) and "4.7 Selecting the Media Supply" (page 57)
Media source
A2
Rotated by
90 degrees
Printable Paper Size
10.5 Logical Printer Settings
A1 roll media
231