Automatic Cut - Xerox 6030 User Manual

14.2

Automatic Cut

Operation Procedure
Print Settings
Media
< > key
Media
Roll1
< > key
Media
Roll2
< > key
Media / Roll2
Type
< > key
Media / Roll2
Trim
< > key
Media / Roll2
Trim : 1
< > key
Media / Roll2
Trim : 2
<Set> key
Media / Roll2
Trim : 2
1
2
3
4
5
6
7
8
9
*
10
Select [Media] from the menu displayed on the
printer control panel.
Press the < > key.
The level from which the desired media is to be
selected will be displayed.
Press the < > key, and then select the roll that
is to have its leading edge cut.
Press the < > key.
The level from which the setting is to be
selected will be displayed.
Press the < > key and select <Trim>.
Press the < > key.
The level from which the number of cuts is to be
selected will be displayed.
Press the < > key and select either [1], [2] or
[3].
Press the <Set> key.
Press the <Set> key.
The leading edge cutting operation will be
started.
Press the < > key to return to the higher level.
14.2 Automatic Cut
329