Specifying Length & Width Percentages Independently - Xerox 6030 User Manual

4.6
Specifying Length & Width
Percentages Independently
With this option, you can reduce or enlarge a document by manually selecting different
percentages for output copy length and width. The copier/printer can also automatically
calculate reduction and enlargement percentages; you simply enter the original
document length and width and then enter the length and width you want the output copy
to be, and the percentages are determined for you.
Percentage
R/E Auto Calc
Direction in which
the document
is inserted
54
Chapter 4 Copy Functions
Enables the length and width percentage rates within a range of
25% to 400% to be specified in increments of 0.1%.
Specifies the length and width of the document image and the
length and width of the output image. The percentage rates are
calculated and set automatically. The percentage rates that are set
automatically are within a range of 25% to 400%.
The manual mode will be automatically activated if [R/E by L&W] is selected when in
the auto mode. If the auto mode is specified after the [R/E by L&W] values have been
set, all settings will be invalidated.
Percentage
Document
R/E Auto Calc
Document dimensions
Y mm
X mm
80% length, 150% width
Copy dimensions
X'mm
R/E by L&W
Y'mm