Attention Tone - Xerox 6030 User Manual

Attention Tone

Sets the buzzer on and off.
The default value when shipped from the factory is [On] for all tones.
Normal
Alarm
Ready to Copy
Operation Procedure
1
Select [Attention Tone] on the
[Custom Presets – System
Presets] screen.
2
Select the required item with the
use of the [ ] and [
and then press the [Open] button.
3
Set whether the tone is to be
sounded or not, and then press
the [Done] button.
The specified parameters will be
reflected back on the [Attention Tone]
setup screen.
4
Press the [Done] button.
The specified values will be saved and
the screen will return to the [Custom
Presets – System Presets] screen.
114
Chapter 7 Custom Presets / Meter Check
Sets whether or not to sound the tone when the buttons on the
control panel are accepted by the system.
Sets whether or not to sound the tone when the buttons on the
control panel are not accepted by the system.
Sets whether or not to sound the tone when the warming up period
has finished.
] buttons,
Custom Presets – System Presets
Time & Date... Timer...
How to start
Scan Speed...
scanning...
Other System
Presets...
Attention Tone
Items Setting
1. Normal On
2. Alarm On
3. Ready to Copy On
Previ-
1/1
ous
Normal Cancel
Off
On
Done
Auto Clear/
Backlight Off.
Attention
Tone...
Done
Open
Next
Done