Xerox 6030 User Manual page 189

[Job and Log] tab
This tab displays job status information (job ID, owner, status, and other information),
and job log information.
It is also possible for an administrator to terminate printing, change priority sequences,
and confirm and delete input log, job log and error log entries.
[Status] tab
This tab enables the current status of the 6030/6050 Wide Format, such as the printer
status and paper status, to be verified. It is also possible to issue commands to start up
the server, receive and terminate jobs, and start print processing from here.
[Print Setup] tab
This tab enables the user to set up logical printers. It is possible to set all parameters
required for printing, such as pen width and output paper size, for logical printers from
this tab.
[Properties] tab
This tab enables the system parameters to be set up, and ftp users to be added and
deleted. This tab is only displayed for users with administrator authorization.
[Tool] tab
This tab enables test printing. This tab is only displayed for users with administrator
authorization.
Refer to "10.2 Job Operations" for details on operations (page 198).
Refer to "10.3 Printer Operations" for details on operations (page 205).
Refer to the " Setting up Logical Printers" section in "Basic Machine Operations" for
details on operations (page 188).
Refer to "9.1 Setting up Communication Parameters" (page 164) and "9.2 Setting up
the System Parameters" (page 178) details on operations.
Refer to "10.4 Test Printing" for details on operations (page 209).
8.3 Operations from Print Services on Web
161