Erasing Document Edges For Copy Purposes - Xerox 6030 User Manual

4.12
Erasing Document Edges for Copy
Purposes
This function erases the images on the outer edges of the document (top, bottom, left and
right edges) for copy purposes.
The edge erase function can be specified within a range of 0 to 50 mm in increments of 1
mm.
It is only possible to specify the edge erase function when using standard size paper. If
the edge erase function is specified for a document that is longer than the standard size,
there is a chance that the bottom edge will be erased.
Lead Edge
Erase
Trail Edge
Erase
Left Erase
Right Erase
Standard document
Direction in which
the document
is inserted
Document that is
longer that standard
Erases images at the top of the page in relation to the direction in
which the document has been loaded.
Erases images at the bottom of the page in relation to the direction in
which the document has been loaded.
Erases images on the left of the page in relation to the direction in
which the document has been loaded.
Erases images on the right of the page in relation to the direction in
which the document has been loaded.
• The amount of edge erase is set against the paper. This is not linked in with the
percentage rate function.

4.12 Erasing Document Edges for Copy Purposes

Edge Erase
69