Scanning Procedures - Xerox 6030 User Manual

Scanning Procedures

This section explains the basic scanning procedures.
Scanner Mode Procedure
1
2
3
Activate the scanner mode from the host PC.
[Ready to Scan] will display on the copier control panel touch screen.
Ready to Scan.
To stop scanning,
operate from external device.
Scanner
1. Load documents face down.
2. Control scanning from
external device.
Insert the document in the scanner face down, with the edge aligned with the
document insertion guide.
If scanning is set to manual start, press the <Start> key at this time.
The machine will scan the document, and the scan data will be transmitted to
the host PC.
Scanning in progress...
Scanner
Ready to send data to
external device.
Terminate the scanner mode at the host PC. The copier/printer will return to
the copier mode.