Reduction And Enlargement Using Size Mapping - Xerox 6030 User Manual

Reduction and Enlargement Using Size Mapping

Reduction and enlargement can be performed using the size mapping table. The size
mapping table establishes relationships between input image sizes and output image
sizes. It enables users to enlarge or reduce prints automatically.
The size mapping table is set up using the logical printer's [Size/media mapping]
selection. [Auto scale] is set to [Enable] and [Media size] (on [Output Option]) is set to
automatic ([AUTO], [OTHER], [MIX], or [MIX2]).
If the size mapping table is set up as shown below, an image with an input size of A3 will
be enlarged to an A2 size (141.4%).
[PLT01H] logical printer settings
A3
Input image
In addition, if the output media size is directly specified with [Output Option] and [Auto
scale] is set to [Enable], it is possible to enlarge or reduce the image so that it matches
the size of the output media when the input size and output size are different.
Input Size Output Size
A0 A0
A1 A1
A2 A2
A3 A2
A4 A4
A2
Output image