Xerox 6030 User Manual page 227

Serial Setup
PORT SETTING
SERIAL
SERIAL
Baud Rate
Baud Rate
300
1
Display [SERIAL] on the setup item selection
screen, and then press the <
2
Select the item that is to be set up with the use of
the < > and < > keys, and then press the
<
[Handshake], [Baud Rate], [Parity], [Data Bit],
[Stop Bit], [EOP Timeout], [Output Response],
and [Job Separation] will be displayed in that
order.
3
Select the parameters with the use of the < >
*
and < > keys, and then press the <Set> key.
An asterisk [*] will display on the right side of
the parameters once they have been set.
> key.
> key.