Xerox 6030 User Manual page 166

Code
Other System Preset (description)
Number
13 Enables or disables the sleep mode.
14 Sets up the amount of time that the image
data from the previous job will be stored in
memory, thereby enabling the [Copy From
Memory] feature.
Once the time set here elapses, the stored
image data will be erased.
15 Sets up the time period during which an
interruption job must begin after the
<Interrupt> key is pressed.
Once the time set here elapses, the
interruption mode is cancelled.
16 Determines if the document scanning width
will be fixed at 36".
17 Determines if the auto mode function will link
with document size series setting.
18 Sets up the density of the gray stamp.
Change
Not Disable: 0
Disable: 1
Time (seconds)
Time (seconds)
No: 0 (Scan at the standard
sizes detected by the
document size sensor.)
Yes: 1 (Scan at a fixed size of
36".)
Link with document size series:
1
Do not link with document size
series: 0
Light: 0, Normal: 1, Dark: 2,
Darker: 3, Darkest: 4
Default
Not
Disable: 0
60 seconds
60 seconds
No: 0
Not linked:
0
Normal: 1