Power Save Mode - Xerox 6030 User Manual

1.4

Power Save Mode

The Power Save Mode automatically lowers the power consumption of the
machine by reducing the fuser power. The machine will enter the power save
mode when no prints or copies have been made for a preset period of time.
•
Low power mode 1
This mode reduces the temperature of the fuser, thereby reducing power
consumption. The parameters that can be set up are [ON], [OFF], and the
time that must elapse before the mode activates (1 to 120 minutes; the
default setting is
[5 minutes].)
•
Low power mode 2
This mode reduces the temperature of the fuser more than Low power
mode 1.
The parameters that can be set up are [ON], [OFF], and the time that must
elapse before the mode activates (5 to 120 minutes; the default setting is
[15 minutes].)
•
Sleep Mode
The sleep mode automatically switches off the power to the printer. The
parameters that can be set up are [ON], [OFF], and the time that must
elapse before the mode activates (15 to 120 minutes; the default setting is
[90 minutes].)
Power is restored to normal levels when a print job is received by the printer, and
when the <Power Saver> key on the printer control panel is pressed.
The Power Save Mode settings can be accessed and changed using either the
<Custom Presets/Meter Check> key on the copier control panel, or the setup
menu on the printer control panel.
Refer to the " Timer" discussion in section "5.2 Setting up the System Presets" for
assistance in changing the power save mode settings from the copier control panel.
Refer to "8.4 System Parameter Setup (Printer Control Panel)" for changing the
power save mode settings from the printer control panel.