Media Specifications - Xerox 6030 User Manual

14.2

Media Specifications

•
For sharp image copying, use the media recommended by Xerox.
•
To prevent media jams or uneven printing, do not use creased, wrinkled, or curled
media.
•
When using unusually flexible media, support the media as it comes out of the media
ejection port so that it will not be pressed against the media table and result in jams.
•
Moisture is not good for media. Place the media in a storage bag and store it in a
relatively dry place.
Vellum media, especially, should be put in a plastic or moisture-proof bag that
contains desiccant.
•
When the machine is not used for a long period, remove the media and store it
appropriately.
Media type/weight*
*Weight range = Light to
Heavy stock inclusive
Size
Recommended
media
*1 Option
*2 A4 size can only be fed portrait.
Item
Bond
Vellum
Tracing Paper
Film
Roll
Manual loading
*2
M.S.I.
Bond (Roll)
Bond (Cut sheet)
Tracing Paper
Vellum (Roll)
Vellum (Cut sheet) HPH (18 to 29lb./70 to 112gsm)
Film (Roll)
Film (Cut sheet)
Description
16 to 29lb. (60 to 112gsm)
18 to 29lb. (70 to 112gsm)
24 to 29lb. (90 to 112 gsm)
50 to 100 microns (2 to 4 mil)
Minimum width 297 mm, maximum
width 914 mm (standard size paper)
*1
Minimum width 210 mm, maximum
width 914 mm (standard size paper)
A3 (horizontal feed), A4 (portrait/
landscape feed)
Premium and Performance Bond
(20lb./75gsm)
Premium and Performance Bond
(20lb./75gsm)
Premium Tracing
(24 to 29lb./90 to 112 gsm)
HPH (18 to 29lb./70 to 112gsm)
Premium Film (100 micron/4 mil)
Premium Film (100 micron/4 mil)